Skip to content
Ayzair

United Arab Emirates

Industrial cooling and ventilation in Abu Dhabi

Abu Dhabi is the heavy end of the UAE. Mussafah and the three ICAD sectors around it hold steel fabrication, pipe spooling, oilfield service yards and equipment refurbishment shops feeding ADNOC and Emirates Steel, while KIZAD next to Khalifa Port has drawn aluminium downstream units, packaging plants and large bonded warehouses. Ruwais anchors refining and petrochemicals to the west and Al Taweelah smelts aluminium on the coast. These are tall, deep buildings with welding heat, furnace radiation and heavy door traffic, where cooling the whole volume is impossible. What works is destratification and steady air movement overhead, wall mounted extraction to pull fume and hot air out, and ducted cooling aimed at the benches where people actually stand.

Abu Dhabi climate — the honest version

Abu Dhabi sits on the coast and runs 43–47 °C with humidity above 70 percent through August and September, so evaporative output falls away in the peak weeks while air movement and forced ventilation carry the load year round.

Cargo discharges at Khalifa Port at Taweelah, about 7 to 10 days from Nhava Sheva, with a short road leg of 60 to 80 km to Mussafah or the ICAD sectors.

6families

Complete range supplied here

34models

Every model available to order

10–20days

Production lead time

24hrs

Sizing and quotation

The complete range

All six Ayzair families, supplied in Abu Dhabi.

Every product we make is available in Abu Dhabi. They are ordered by how well each one suits the local climate and the industries here, but nothing is off the list.

Industrial HVLS Ceiling Fans supplied in Abu Dhabi, United Arab Emirates
Best fit here

HVLS Large Ceiling Fans — DC Energy Saving / AS Series

HVLS (High Volume, Low Speed) fans move massive volumes of air gently across large indoor spaces. One Ayzair fan replaces 10–20 small high-speed fans — cutting energy use by up to 70%.

70 %5–8 °C1,200
Hammer Exhaust Fans supplied in Abu Dhabi, United Arab Emirates
Strong second

Hammer Exhaust Fans — Heavy-Duty Industrial Ventilation

A high-capacity industrial ventilation system designed to expel large volumes of air efficiently — trusted across poultry farms, greenhouses, factories and warehouses.

68,000 m³/h151750 mm
Industrial Duct Air Coolers supplied in Abu Dhabi, United Arab Emirates
Also specified

Duct air coolers for factories and warehouses

A complete range of industrial duct air coolers - ductable evaporative units that pull fresh outside air, filter and cool it, then push it through ducting to exactly the parts of a factory, warehouse or commercial floor where people actually work.

30,000 CMH1.5–3 kW80–95 %
Mobile Industrial Fan — Model 1500 supplied in Abu Dhabi, United Arab Emirates
Also supplied

Model 1500 Heavy-Duty Mobile Industrial Fan

A 1.5-metre heavy-duty mobile fan that pushes 38,000 m³/h of directed airflow while drawing just 370 watts — roll it exactly where the heat is.

38,000 m³/h370 W1.5 m
Industrial Portable Air Coolers supplied in Abu Dhabi, United Arab Emirates
Also supplied

AYZAIR TENT-150 Industrial Portable Air Cooler

A 150-litre portable evaporative cooler on castor wheels — 16,000 CMH of cooled fresh air covering 1,000 sq ft, on just 500 watts of single-phase power.

16,000 CMH1,000 sq ft150 L
Inline-Jet Mixed-Flow Duct Fans supplied in Abu Dhabi, United Arab Emirates
Also supplied

Inline-Jet Fans — Mixed-Flow Duct Fans, Ø100 to Ø315

Precision-engineered mixed-flow inline fans in high-strength PP — delivering up to 2,300 m³/h and 700 Pa of static pressure across five duct sizes.

052300 m³/h700 Pa

Where we supply

Industrial areas of Abu Dhabi.

Mussafah Industrial Area
Industrial City of Abu Dhabi ICAD I, II and III
Khalifa Industrial Zone Abu Dhabi KIZAD
Khalifa Port Free Trade Zone
Abu Dhabi Airport Business City
Ruwais Industrial City
Al Taweelah

Who buys here

Industries in Abu Dhabi.

  • Oil and gas services and fabrication
  • Steel and heavy engineering
  • Petrochemicals and refining support
  • Aluminium and downstream products
  • Construction and precast concrete
  • Marine and shipbuilding

Worth knowing locally

  • Contractor and vendor registration for ADNOC, Emirates Steel and EGA sites normally calls for CE and IEC documentation plus a factory test certificate, all of which ship with the consignment.
  • Power in the emirate is 415 V three phase 50 Hz and ICAD sheds are wired for three phase, so fans and coolers connect directly to the existing panel.
  • Khalifa Port free trade zone allows duty suspension where equipment is being re-exported to a project outside the UAE, which several contractors use for camp and site cooling.

Abu Dhabi enquiry

Get a proforma invoice for Abu Dhabi.

Tell us the building — area, roof height and what happens inside — or name the models and quantities you already know you need. You will get USD pricing, your Incoterm, a container loading plan and a confirmed lead time within one working day.

Or WhatsApp instantly

We respond within one working day. Your details are used only to prepare your quotation.

Answers

Supplying Abu Dhabi — common questions

Cannot find what you need? Call +91 80871 10156 or WhatsApp us — an engineer, not a call centre, picks up.

Ask on WhatsApp
What works better in a Mussafah fabrication shed, duct coolers or big ceiling fans?

Ceiling fans first. A welding and fabrication shed traps a hot layer under the roof, and an HVLS fan mixes that layer down and puts a steady breeze across the shop floor for about 1.5 kW. Duct coolers are then added over the fitting benches and rest areas, where a targeted temperature drop is worth the water and the ductwork.

Do you supply equipment acceptable to Abu Dhabi project vendor lists?

The range is CE marked and built to IEC with LVD and EMC declarations, and each unit ships with a test certificate showing airflow, current draw and insulation results. That is the pack most Abu Dhabi main contractors and the ADNOC vendor channel ask for. Third party inspection before dispatch can be arranged if your buyer specifies it.

How long from purchase order to equipment on site in Abu Dhabi?

Production runs 10 to 20 working days depending on the mix and quantity. Sailing to Khalifa Port adds 7 to 10 days, and clearance plus the road leg to Mussafah is usually two to three days. Planning on six to eight weeks from order to a running installation is realistic for a first shipment.

Nearby

Also supplied across United Arab Emirates.

Next step

Shipping to Abu Dhabi?

Send your requirement and we will confirm the freight route, transit time, landed cost and whether our equipment genuinely suits Abu Dhabi conditions — before you commit to anything.

Call nowGet a quote