Skip to content
Ayzair

Insights

Engineering notes, not marketing copy.

Sizing methods, honest comparisons and the arithmetic behind the claims. Written by the same engineers who size customer buildings — including the parts where our products are the wrong answer.

Duct Air Cooler for a Factory: How Many, What Size, and Where They Go
Engineering9 min read

Duct Air Cooler for a Factory: How Many, What Size, and Where They Go

A duct air cooler sits outside the building and pushes cooled fresh air in through ducting. This guide covers how many units a shed actually needs, how to check that number two different ways, and what has to be ready on site before installation day.

Read the guide
Evaporative Cooler vs Air Conditioner for a Factory: The Honest ComparisonBuying guide

Evaporative Cooler vs Air Conditioner for a Factory: The Honest Comparison

AC cools harder. Evaporative cooling costs a tenth as much to run and brings in fresh air. Here is how to decide which one your building actually needs — including the humidity threshold where the answer flips.

8 min read · Updated Aug 2026

How to Size an HVLS Fan for a Warehouse or FactoryEngineering

How to Size an HVLS Fan for a Warehouse or Factory

Diameter, ceiling height, spacing and obstructions — the four variables that decide whether an HVLS installation feels transformative or disappointing. Here is how to work them out before you buy.

7 min read · Updated Jul 2026

Poultry Shed Ventilation: How to Calculate Exhaust Fan RequirementEngineering

Poultry Shed Ventilation: How to Calculate Exhaust Fan Requirement

Two accepted methods, one worked example, and the fan schedule that comes out of it. Everything you need to specify ventilation for a broiler or layer house without guessing.

9 min read · Updated Jun 2026

Seven Ways to Cut a Factory Cooling Electricity Bill Without Losing ComfortOperations

Seven Ways to Cut a Factory Cooling Electricity Bill Without Losing Comfort

Cooling is often the second-largest line on an Indian factory power bill after process load. These seven measures are ordered by payback period — the first three usually pay back inside a season.

6 min read · Updated Jul 2026

How to Size an Inline Duct Fan: Diameter, Airflow and Static PressureEngineering

How to Size an Inline Duct Fan: Diameter, Airflow and Static Pressure

Airflow alone will not select an inline fan. The number that decides whether it moves air or just makes noise is static pressure — and almost nobody is asked for it.

8 min read · Updated Nov 2026

How Many Exhaust Fans Does a Factory Need? Sizing by Air ChangesEngineering

How Many Exhaust Fans Does a Factory Need? Sizing by Air Changes

Volume times air changes gives you the airflow. Then comes the part most specifications skip — the inlet area, without which the fans cannot deliver what they are rated for.

7 min read · Updated Nov 2026

Spot Cooling: When an Industrial Mobile Fan Beats a Fixed InstallationEngineering

Spot Cooling: When an Industrial Mobile Fan Beats a Fixed Installation

Air movement does not lower the temperature by a single degree. It changes how warm a person feels, which is a different problem — and often the one you actually have.

6 min read · Updated Nov 2026

Portable or Ducted? Choosing an Evaporative Cooler for a WorkshopSelection

Portable or Ducted? Choosing an Evaporative Cooler for a Workshop

Before choosing between portable and ducted, settle a prior question: whether evaporative cooling will work in your climate at all. In humid air it will not, and no model fixes that.

6 min read · Updated Nov 2026

Next step

Let us size the right system for your building.

Share your floor area, roof height and what happens inside. A member of our engineering team will return a no-obligation quotation within 24 hours.

Call nowGet a quote