Canada
Industrial cooling and ventilation in Toronto
The Greater Toronto Area is the largest industrial property market in Canada, and almost none of the demand we see here is for cooling. Brampton and Mississauga hold the big grocery, retail and parcel distribution buildings, Vaughan and Milton have taken most of the new tall bay construction, and Scarborough keeps a dense mix of plastics moulding, commercial printing and automotive parts feeding the Ontario assembly plants. Ceiling heights of 12 to 14 m are now normal. In a building like that a gas fired unit heater spends the winter warming a deck nobody works under, and a slow turning ceiling fan running in reverse at low speed pushes that layer back to the floor, which typically trims heating energy by 20 to 30 percent. Add extraction where moulding, printing solvents or cooking heat need removing and the specification is complete.
Toronto climate — the honest version
Toronto gets three genuinely hot humid weeks in July at 30–32 °C, then spends five months below 5 °C, and in a 12 m high warehouse that winter pattern leaves roof air sitting 8 to 12 °C above floor air day after day, which is where the recoverable money actually is.
Montreal is the usual gateway at 26 to 33 days from Nhava Sheva, followed by 540 km of road or CN intermodal into the GTA, adding one to three days · Vancouver at 30 to 36 days plus four to five days on rail suits buyers already routing westbound freight.
6families
Complete range supplied here
34models
Every model available to order
10–20days
Production lead time
24hrs
Sizing and quotation
The complete range
All six Ayzair families, supplied in Toronto.
Every product we make is available in Toronto. They are ordered by how well each one suits the local climate and the industries here, but nothing is off the list.
Where we supply
Industrial areas of Toronto.
Who buys here
Industries in Toronto.
- Distribution and retail logistics
- Food and beverage processing
- Plastics moulding and extrusion
- Commercial printing and packaging
- Automotive parts manufacture
- Cold storage and grocery handling
Worth knowing locally
- Ontario industrial buildings are fed at 208 V or 347/600 V, 60 Hz. Since our standard build is a 50 Hz machine, Toronto orders enter production as a 60 Hz job with motor and control selection set against the supply you confirm.
- CSA or cUL certification is required for electrical equipment installed in Canada, and the Electrical Safety Authority will look for the mark at inspection. We arrange certification through a CSA accredited body on the order rather than claiming an existing file.
- Winter delivery into the GTA is straightforward but installation is not. Book crane or scissor lift access before the container lands, because yard congestion and snow clearance around loading doors routinely push a January install back by a week.
Toronto enquiry
Get a proforma invoice for Toronto.
Tell us the building — area, roof height and what happens inside — or name the models and quantities you already know you need. You will get USD pricing, your Incoterm, a container loading plan and a confirmed lead time within one working day.
Export desk
Answers
Supplying Toronto — common questions
Cannot find what you need? Call +91 80871 10156 or WhatsApp us — an engineer, not a call centre, picks up.
Ask on WhatsAppHow much heating energy does destratification actually save?
In a 12 m building with unit heaters and a poorly sealed envelope, measured savings usually land between 20 and 30 percent of gas consumption. The mechanism is simple: you stop paying to heat a roof void and you reduce the temperature difference driving losses through the deck. Savings are smaller in low, well insulated buildings and larger in tall ones with high air change rates.
Do the fans run all winter or only during occupied hours?
Most Toronto sites run them continuously at low speed through the heating season, typically 15 to 25 percent of full speed, which is quiet and draws very little power. Running only during shifts still helps but loses the overnight recovery. A simple thermostat comparing roof and floor sensors is the usual control, and we can supply the variable speed drive with the fan.
Is CSA certification included in your price?
It is quoted as a separate line rather than assumed. Canadian installations need a CSA or cUL mark, and for this equipment that is arranged through an accredited certification body against the order, covering the motor, drive and safety cable. Tell us the number of units at enquiry, because certification cost per unit falls sharply once a project covers more than a handful of fans.
Nearby
Also supplied across Canada.
Next step
Shipping to Toronto?
Send your requirement and we will confirm the freight route, transit time, landed cost and whether our equipment genuinely suits Toronto conditions — before you commit to anything.