Poland
Industrial cooling and ventilation in Warsaw
Warsaw anchors the largest warehouse market in Poland and almost all of it is high bay. The A2 corridor west of the city carries the Błonie, Ożarów Mazowiecki, Pruszków and Sochaczew parks where e-commerce fulfilment operators run pick faces around the clock, Nadarzyn and Janki to the south hold pharmaceutical distribution and cold chain support, and Piaseczno and Żerań keep printing houses, light assembly and food plants. Roofs at 10 to 12 metres are standard and gas or district heating runs for six months. The complaint a Polish facility manager actually raises is never that the shed is hot. It is that the thermostat at 1.5 metres reads 17 °C while a thermal camera finds 27 °C at the ridge, and the burners keep firing to close a gap that mixing would close for free. Slow HVLS fans return that layer to the floor and extract fans deal with forklift fumes and summer peaks.
Warsaw climate — the honest version
Warsaw runs a continental year in which January averages around -3 °C with long frosts and a heating season stretching from October into April, while July brings only a short run of days near 30 °C, so heat loss into the roof matters far more than cooling ever will.
Containers sail from Nhava Sheva to Gdańsk or Gdynia in roughly 25 to 32 days, then travel south by road or rail on the S7 corridor and reach the Warsaw parks the following day · EXW · FOB · CIF quoted.
6families
Complete range supplied here
34models
Every model available to order
10–20days
Production lead time
24hrs
Sizing and quotation
The complete range
All six Ayzair families, supplied in Warsaw.
Every product we make is available in Warsaw. They are ordered by how well each one suits the local climate and the industries here, but nothing is off the list.
Where we supply
Industrial areas of Warsaw.
Who buys here
Industries in Warsaw.
- E-commerce fulfilment and third party logistics
- Pharmaceutical distribution and cold chain
- Food processing and packing
- Printing and packaging
- Light assembly and electronics
- Building materials distribution
Worth knowing locally
- Polish industrial supply is 400 V three phase 50 Hz, identical to the build standard for Ayzair motors, so nothing is rewound or stepped down on site.
- Poland is in the EU, so equipment enters under CE marking with the declaration of conformity issued against the Machinery Directive and the LVD and EMC directives, and no separate national approval applies.
- Fulfilment operators in Błonie and Nadarzyn run mezzanines and high racking, so fan diameter is set from the clear height above the top beam rather than from the building ridge.
Warsaw enquiry
Get a proforma invoice for Warsaw.
Tell us the building — area, roof height and what happens inside — or name the models and quantities you already know you need. You will get USD pricing, your Incoterm, a container loading plan and a confirmed lead time within one working day.
Export desk
Answers
Supplying Warsaw — common questions
Cannot find what you need? Call +91 80871 10156 or WhatsApp us — an engineer, not a call centre, picks up.
Ask on WhatsAppHow much heating energy does destratification actually save in a Warsaw warehouse?
In a heated hall of 10 to 12 metres, measured savings usually land between 20 and 30 percent of heating energy. The saving comes from removing the temperature gradient, so the burners satisfy the floor thermostat without first overheating the roof void. Over a Mazovian heating season of roughly six months, that recovers the fan cost in one or two winters.
Would an evaporative air cooler make sense in a Warsaw distribution centre?
Honestly, no. Warsaw has perhaps two or three genuinely hot weeks and summer air here carries enough moisture to blunt evaporative performance when it matters most. The sensible summer answer is air movement from the same fans bought for winter, plus roof or wall extraction to clear accumulated heat overnight. We would not quote ducted coolers for this market.
Do the fans come with EU paperwork our safety officer will accept?
Yes. Each unit ships with a CE declaration of conformity referencing the Machinery Directive, LVD and EMC, together with IEC test reports, wiring diagrams, IP55 motor data and installation and maintenance manuals in English. Polish importers normally add their own translated user instructions for operators, and we support that by supplying the source documents in editable form on request.
Nearby
Also supplied across Poland.
Next step
Shipping to Warsaw?
Send your requirement and we will confirm the freight route, transit time, landed cost and whether our equipment genuinely suits Warsaw conditions — before you commit to anything.